Stampi e martelli per ASTM e AASHTO

Proctor Moulds are manufactured from steel with a corrosion-resistant coating; their smooth internal surfaces prevent edge scoring during compaction and ensure reproducible density. Standard 4 in (101.6 mm) and 6 in (152.4 mm) inner-diameter options lock seamlessly with detachable extension collars and base plates; the stud-and-wing-nut assembly provides quick setup and secure tightening. The 4 in mould has a volume of 1/30 ft³ (~944 cm³), while the 6 in mould has a volume of 1/13.33 ft³ (~2124 cm³); this geometry provides volume and height tolerances fully compatible with ASTM/AASHTO compaction methodology. Rammers are optimized according to test designation.  Standard Proctor (ASTM D698 / AASHTO T99): 5.5 lb (2.5 kg) rammer mass and 12 in (305 mm) drop height Modified Proctor (ASTM D1557 / AASHTO T180): 10 lb (4.5 kg) rammer mass and 18 in (457 mm) drop height both rammer types feature a 2 in (50.8 mm) face diameter and a vented guide sleeve to release trapped air, ensuring that each blow delivers consistent energy and that the compaction curve is reliably developed